Functional Printing Enables Next Wave of Mass Produced Electronic Goods
Large-area, organic and printed electronics – complementing traditional silicon-based microelectronics – is at the threshold of mass production, promising a host of thin and lightweight, flexible and robust products. LOPE-C 2010, the annual conference and exhibition of the OE-A, held May 31 to June 2, 2010, in Frankfurt, Germany, will demonstrate the latest process technologies and applications to a worldwide audience.
- Advanced inkjet printing machine for the production of organic electronics. Source: Fujifilm Dimatix
These new products are manufactured at very low cost by extending well established graphic printing techniques - layering very thin stacks of electronic components, semiconductors, insulators and barriers on polyester substrates. Functional printing enables a multitude of novel applications such as organic solar cells, OLED displays and wall-sized OLED lighting, e- readers, flat batteries, RFID tags, sensors and actuators for ambient intelligence in textiles and smart packaging, even low-cost electronic gadgets suited for one-time use - easily integrated in our familiar living surroundings.
Low Cost Electronics: Printed Roll to Roll
Functional printing of mass-produced organic electronics is based on various rapidly evolving processes: flexographic printing, a subset of relief printing, transfers the ink from a printing form to plastic substrates. A variation of flexo is gravure printing, in which the printing pattern is defined by very small cups engraved in a printing cylinder. Gravure is a low-pressure technique enabling the use of organic dissolvent. Offset, a flat printing technique widely used for high-volume graphics and delivering excellent resolution at a very high throughput, is an additional option.
Screen printing is another high potential for mass producing organic electronics. Currently applied in PCB manufacturing, screen printing defines the printed pattern through an opaque mask applied to a fine mesh. By applying pressure the ink is forced onto the substrate in the non- masked areas. Rotary screen printing allows printing in thick layers, roll-to-roll.
"Roll-to-roll printing opens up new opportunities for mass producing organic devices and systems," says Dr. Christian Maas of Werner Kammann Maschinenfabrik in Bünde, Germany. "High-end screen printing is a versatile basis for highly productive printing and coating applications." Among them, says Maas, are smooth and evenly spread electrodes for defibrillators, disposable glucose test strips, flexible batteries customizable for small portable products, antennas for RFID tags and automotive sealing devices.
A detailed overview of the various printing and patterning technologies as well as current and future applications is given in the "OE-A Roadmap for Organic and Printed Electronics" recently published by the Organic Electronics Association (OE-A).
Inkjet Printing for High Throughput Manufacturing
A strong contender for the printing of organic electronics is inkjet printing. Well known as a ubiquitous office appliance, inkjet uses very small droplets of ink, which are ejected onto the substrate through thermal or piezoelectric effects. Feature sizes of a few micrometers have been achieved. A very important, distinctive property of inkjet is that, due to its digital definition of the printed pattern, each subsequent impression can be different, allowing individual layouts and signatures.
"Inkjet has a bright future in the deposition of digital materials on organic substrates," says Martin Schoeppler, CEO and President of FUJIFILM Dimatix, Santa Clara, CA, USA. Using multiple printheads in parallel tremendously increases throughput - evolving inkjet to a high-quality mass printing technology. "The opportunities are unlimited," Mr. Schoeppler says, "ranging from polymer solar films, flexible polymer-based lighting elements, electronic books and paper-like electronic products to intelligent packaging featuring interactive displays and controls for consumer products."
Atmospheric and Vacuum Coating Processes
There is a host of other patterning techniques, such as laser ablation, vacuum deposition, soft lithography and large-area optical lithography, or solution coating techniques like slot-die, wire-bar or curtain coating. Vacuum deposition processes show great potential for large- area roll-to-roll patterning and are pursued by Fraunhofer IPMS in Dresden, Germany. At its core is depositing functional layers for organic photovoltaics and OLED lighting devices on flexible substrates.
As an alternative, an atmospheric plasma-based powder coating technology for micro- and nanoparticle deposition has been developed by Reinhausen Plasma of Regensburg, Germany. "Plasmadust," as the process is called, works with materials such as Al, Cu, Zn and polymers, achieving high deposition rates at a low temperature load of the substrate. Among the applications are plasma and laser sintering, solar cell wafer metallization, and the manufacturing of thinfilm batteries and fuel cells.
Enabling Electronics Everywhere
Large-area, organic and printed electronics in its various production technologies is enabling vast opportunities for attractive consumer goods and intelligent packaging. Interactive periodicals, combining print and online content, are close to being introduced. Also on the agenda are medical applications, organic photovoltaics and lighting. The mid-term outlook for organic and printed electronics is evidenced in the current third edition of the official OE-A Roadmap White Paper. The latest progress in products and processes will be demonstrated hands-on at LOPE-C 2010.
About LOPE-C
LOPE-C (Large Area, Organic & Printed Electronics Convention) is the leading, fully industry-sponsored annual conferences and exhibition of organic and printed electronics. LOPE-C presents the economic trends and the scope of scientific achievements in the field. The convention focuses on the production and application of organic and printed electronics. LOPE-C 2010 is held May 31 to June 2, 2010 at the Congress Center of Messe Frankfurt, Germany. It is jointly organized by the Organic Electronics Association (OE-A) and Messe Frankfurt Ausstellungen GmbH. www.lope-c.com
High resolution pictures are available at the press area of the LOPE-C website.
(Press Release of VDMA)
Press Contact:
VDMA
Verband Deutscher Maschinen- und Anlagenbau e.V.
Jens Rohrbäch
Public Relations Officer
Lyoner Strasse 18
60528 Frankfurt/Main
Germany
Tel: +49 (0)69 66 03-15 08
Fax: +49 (0)69 66 03-25 08
E-mail: Jens.Rohrbaech(at)vdma.org